Installing Wall Lamps comes in handy whenever you want to add illumination or aesthetics, well it can be both functional and fashionable. Schema? You are able to install a wall lamp easily on your own, which saves you cost and time, all you need are the correct tools and a bit of knowledge. Let’s now easily guide you through the process of how you can install the lamp effortlessly on your own.

1. Make Sure to Have All Required Equipment Ready

In order to make the installation process more smoother, double check if all equipment required are present, they are listed below:

• Correctly sized drill bit and drill

• Screws with wall plugs which in most situations come with the lamp

• Screw driver

• Level

• Pencil or marking device

2. Accurately Mark the Spot on the Wall

Remember, the first procedure in the installation procedure is to decide on the wall where the wall lamp would go. While picking a spot, ask yourself the type of the lamp bought, if it is a reading lamp, accent or lightening one, and remember that the spot must accommodate the flux. Use a level to mark the height, which can also assist in the decor of the rest of your room.

3. Fix the Mounting Bracket

In most instances, wall Sconces are shipped with a fitting either bracket or a plate that is supposed to be attached on the wall. The first step is to place the bracket on the mark, then use a pencil and trace the place of screws. Start making holes in position and drill them while placing wall anchors where needed. Place the anchors and then use screws to attach the mounting bracket and ensure that the screws are tight enough.

4. Begin Wiring

In the case where your wall mounted lamp has electrical wiring the first step is to turn off the circuit breaker as a safety so precautions are adhered to. Thereafter place black wires with black and white wires with white, as it is the case in this drawing, onto the electric wiring system on the wall. In case of uncertainty on the correct process to follow when wiring, it is appropriate to seek guidance from a qualified electrician.

5. Place the Lamp Fixture in Position

In case you have finished with the wiring, you are almost there. The final process is fixing the lamp fixture over the mounted bracket. Depending on the design of the lamp, it can be screwing to the bracket or sliding to the bracket. Check that the fixture is straight and secure. Simply, if it is still dangling, it’s not right and needs to be done so that the angle is correct.

6. Switching on the Lamp

Start by switching on power from the circuit breaker and test the Lamp. Make sure that you check the working condition of the light and if it is properly fixed on the mounting. If need be, fixtures may be relocated or brightness adjusted.

Conclusion

In general, mounting a wall lamp can be a quick and satisfying task, increasing both the illumination and decor of the room. Carrying out the above mentioned strategies means that you will have your beautiful lamp set up within the shortest time possible. However, be careful especially when your lamp shines on naked live wires, and enjoy how your home is transformed in terms of appearance and practicality with the aid of a wall lamp.