When there is a need of some lighting, Table Lamps come in handy but with time the light bulb socket that is connected to the wire can become wobbly which can lead to the lamp misfiring or becoming too faint or dim. If you are struggling with this issue, then there is no reason to panic! You can easily fix this issue by tightening the loose socket and bringing back the function of your lamp. This guide will help you understand how you can do it.

1. Required Tools

Before you start tightening the socket loose wires make sure to have the following tools with you:

Screwdriver (that is dependent on whether the screw type is a Phillips or Flathead)

Some Pliers if necessary

Some Electric tape for better security

2. Remove The Power Source Of The Lamp

The first and foremost step is removing the power cable of the lamp that is in the socket. This will help prevent any sort of electric shock when you are working on the parts of the lamp. Always keep your safety in mind when working with electrical devices.

3. Look over the Socket

After the lamp has been unplugged, inspect the socket. You might find out that the socket is loose or the screws have come undone. In some instances, it may be the case that the socket is a little bit rotated, so it feels loose. Lightly rotate the socket and try to see if it shakes or it is positioned a bit away from the base of the lamp.

4. Secure the Screws

Screws that hold the socket in position are mostly found on table lamp sockets. Use a screwdriver to gently twist the screws inwards. If the screws cannot be turned by palm, then pliers can be used for gentle tightening. Don’t make it too tight as it could damage either the socket or the lamp.

5. Test the Socket’s Alining Thereafter, before making any more adjustments, the alignment of the socket should be examined again. It should not be wobbling in any way if it is placed firmly in its location. If needed, the position of the socket can be changed till it has been made straight and firm.

6. Reassemble The Lamp And Hack It

When you feel content about the tightness of the socket, proceed step by step to reassemble the lamp making sure that you plug in the parts that you had detached. Now plug in your lamp again and test if it turns on when you do. The socket should be firm in place and your lamp should be working properly and providing light without flickering.

Conclusion

In case you have ever wondered how to fix a loose socket on a table lamp, this is very easy and only takes a few minutes. This will save you the trouble of going out to buy an unneeded replacement lamp since, with some correct usage of equipment and some care on your side, you can fix the problems your lamp has. Do remember to take all the necessary safety measures and your lamp will be restored back to working conditions as if it was freshly bought.